banner



How To Install Doorbell Camera

Installing Your Video Doorbell

Video Doorbells Install Guide PDF

The Video Doorbell provides HD video of who or what is at your front end door. It is equipped with a 180° field of view and a congenital-in microphone and speaker, so you can see, hear, and speak to anyone on your doorstep using your app.

It also connects to your home Wi-Fi and begins recording anytime someone rings it or if motion is detected.

The instructions below characteristic a slimline model, but they are similar for the round video doorbell, as well.

Installation parts

  • Video doorbell (slimline or round model)
  • Wall mounting bracket
  • Mounting screws and wall anchors
  • Digital chime adapter (optional, if needed)

Pre-Installation Checklist

In order to make sure your existing doorbell setup is uniform with this device, y'all'll need to cheque the post-obit items.

1. Your existing doorbell should be wired, not electric or battery powered.

two. Your doorbell chime should exist mechanical, which will typically make a standard "ding-dong" audio. A digital chinkle will usually have a custom melody and often have a speaker included with the doorbell.

If you have a digital chinkle, you'll use the digital adapter (run across photo beneath) and the instructions in your manual to convert it to a mechanical 1.

three. Make certain the Wi-Fi at the doorbell location has an upload speed of at to the lowest degree 2Mbps. You tin can utilise your smartphone and the instructions in your installation manual to bank check this speed, or phone call a virtual Smart Home Pro for more recommendations.

If y'all accept whatever questions about these pre-installation steps, call our virtual Smart Dwelling Pro line for assistance.

Installation Instructions

1. Carefully remove your existing doorbell by unscrewing and detaching as needed.

2. Brand certain the existing doorbell wires don't slip back into the wall

3. Accept the mounting subclass and feed the existing doorbell wires through the pigsty in the heart. Make sure the bracket is leveled, and so secure firmly to the wall using the provided wall screws

4. Loosen the two terminal screws on the front of the mounting subclass. Take the existing doorbell wires and attach one wire to each of the screws, and then tighten the screws. Information technology doesn't thing which wire goes to which screws, as long as each wire has a expert connection to the screws and they aren't touching each other.

five. Remove the belongings spiral on the bottom of mounting bracket, then attach the video doorbell to the mounting bracket and tighten property screw to the bottom of the camera

6. Video doorbell's LED calorie-free should wink as it powers upward and connects.

Controlling your device

View and interact with the alive stream

Users tin only view alive video from a Video Doorbell using the post-obit devices/platforms:

  1. The A3 Smart Home app on an Apple or Android mobile device (e.one thousand., smartphone or tablet).
  2. Your touch-screen command panel

To start streaming the Video Doorbell from your app

  1. Log into your A3 Smart Home app
  2. Tap the Bill of fare push button (located in the top left)
  3. Tap Doorbell Camera
  4. Tap Start Video

To talk through the Video Doorbell from your app

  1. Log into your A3 Smart Home app
  2. Tap the Bill of fare push button (located in the summit left)
  3. Tap Doorbell Camera
  4. Tap Start Video
  5. Tap and hold Hold to Talk
  6. To end the call and exit from the live stream, tap Cease Phone call

Source: https://smarthome.calstate.aaa.com/install/video-doorbell

Posted by: hembreewaskents.blogspot.com

0 Response to "How To Install Doorbell Camera"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel